Tennessee Red Cedar Chest
End view of the chest after oil finish application.
The complete construction is shown in the link:
http://www.smilebox.com/playBlog/4d7a637a4f5445314e7a513d0d0a&blogview=true
Views: 617
Projects: Tennessee Red Cedar Chest #1.
Comment
-
Comment by Mike Robson on December 31, 2013 at 2:33pm
-
Hey Jay, been away for too long. Thanks for sharing your workmanship !
-
Comment by Jay Boutwell on July 20, 2013 at 10:50pm
-
Thanks again Jim, I like doing these slide shows as a method of showing others how to build a project. This is my own design so I don't have to worry about copy rights. It is a lot better to show in photos than trying to explain in works. If anyone wants to build one they can copy any or all of it.
-
Comment by james wilhelm on July 20, 2013 at 10:44pm
-
Jay , really like the construction link, very nice pictures and detail,s , would recommend every one to watch, thanks for showing , JIM !
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community