Kreg Owners' Community

Anyone recommend where to buy casters for the shop at a descent price? Brand? I have looked around and seen several vendors. I don't know what to look for pricing wise etc. Any suggestions would be appreciated. Looking for casters to put on rolling bench, table saw, etc. 

Views: 392

Reply to This

Replies to This Discussion

Rockler hardware offers some excellant HD quality casters, that will provide many years of service.

HD 4" swiveling casters, 4-pack

NOW on sale at Rockler
Item #: 47582
$15 (originally $30)

Four swiveling casters for easy mobility in the tightest spaces

47034 - Router Table Stand Casters (4-Pack)

This type Caster set for steel shop stands, 4 pack

Rockler item # 47034

$40 set  (originally $50)

http://www.rockler.com/rockler-caster-set-for-steel-shop-stands-4-pack

Ken,

Thanks for the info on the casters. The first one looks good. However my project has been put on hold for a bit. I have an alternate project to complete. These are in the thread so I can come back when this project gets back on track. Thanks for the help. 

Go to Harbor Freight and buy a 10 dolly and take the casters off

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_