Kreg Owners' Community

The Kreg Jig Owners' Community went through a radical design change in the past week.  What do you think of the final results?  Thumbs up?  Thumbs down?  Share all the details so we can continue to improve!

Views: 745

Reply to This

Replies to This Discussion

Its nice simple to use.
Am new to Kreg and carpentry in general - good site.
Really like the project section.
Works well for me. I like it.
This is great, much easier to find what your looking for.
The most important aspect is the simple to use and navagate around. Especially for us old foggies. We like the change.
A very well done site, pity I am at work M-F and have just spent 1 1/2 h looking at all the good info/pictures.
Best do some boring work stuff.
I shall enjoy Fri arvo Sat & Sun doing interesting work
Nice changes. Liked the ease of being able to view project pictures and discussions.
Me Like...Me like a lot!
Same old Ning network, just new graphics???
Imagine that !!!!!!! The page looks like "wood". There's a concept for ya.

I like it much better than the old way.

T H U M B S U P ! ! ! ! !
you no it looks great but I think it should have pocket holes in the wood.After all that is the main reson for the web site to promote KPHS.

jens

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_