Tags:
I was able to make a tabletop jig that i mounted the Kreg Jig on and it also has supplies such as screws and plugs for my projects. This particular jig helped me work with any size board so that i could slide it along the length the jig onehanded and drill the holes i needed to join pieces or simply support the piece comfortably.
I have included pictures so you can make your own
I designed and built this jig for my K3 Master System. It clamps to my workbench and is easily removed when not in use.
The jig is composed of 3/4" prefinished maple plywood, pocket screwed together in an L shape. I fabricated a vacuum coupling using Shop-Vac 906-87 Universal Tool Adapter and then added the Kreg KMS7506 mini trak and Kreg KJSS material support stops. I drilled a small hole in the top to insert the allen wrench used to adjust the drill bit depth stop.
Rex,
Great question. One good way to have your Kreg Jig ready at the drop of a hat is to mount the jig (using the 4 screw holes in the base) directly to a small piece of plywood which can be quickly thrown on top of your workbench and clamped down to secure. Some owners will also drill small holes in the plywood to hold their drill bit, driver bit, allen wrench, etc. It's up to you to customize as much as you'd like!
It'd be great to see what some of the owners here have come up with! Post some photos, guys!
-KregRep
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service