Kreg Owners' Community

Where do you all find your wood to build things with?  When I tried the usuals, Home Depot and Lowes, I found I would be spending 250 bucks just to make a bookshelf!!!

Any ideas where to find cheaper lumber?

thanks!

Views: 1599

Reply to This

Replies to This Discussion

Well provided you live anywhere near a local mill work manufacturer. In my cass the closest one nearly 100 miles from me. Lowes is 7 miles away, Homedepot 1 1/2 miles and Menards is about the same in the other direction. HD may not carry the best wood, but I can get it within minutes from my house, and pretty cheap if I am working in pine. Other wood options like popular, red oak, and ash are avalible but more expensive.
I use cheap hardwood and veneered plywood for my structure and nice hardwood for my face frames, tops and draw fronts. There is really no place to get "cheap" wood. Wood prices are still market and supply driven so they will be in the same ballpark everywhere you go. Beside using cheaper hardwood and plywood in pieces that would be hidden, you just have to make sure that you plan your cuts to have the least amount of waist possible and if you have a table saw you can buy larger stock and rip it down to smaller working pieces which gives you more bang for your buck money wise.
for hard woods call around to any lumber yard and ask for straight line--it is 3/4" thick or better and has one perfect edge--various widths 4 to 10 or 11 or so--
just bought some oak and alder for under $2 per food--comes in a couple of grades- you need to have a nice table saw and a thickness planer if you want exact thickness--but the stuff is what the cabinet shops buy and use. also ask for whatever other types of bulk they sell--and what kinds of woods they can get--generally you can get whatever you want -- and some yards stock more than others--alot of them don't mess with straight line as they have to buy large lots,
I go to the local Habitat for Humanity store. Contractors often donate wood left over from projects (mostly molding) and sometimes you can find some good usable wood for a project. Cost is generally very affordable plus you help local charities. Hope it helps
Many places to find wood. Barns and old houses that will be torn down. Sawmills, not all but some will sell green ripped wood for you to dry yourself or they may sell kiln dried wood. I am fortunate that there is just a place 14 miles from where I live where I can buy all kinds of kiln wood and of course the prices vary to the type of wood.. Rough cut wood is always cheaper than planed. I always plane my own so that I will always have shavings to smoke meats with. My next project will be done with hickory or cherry. Another source is to find trees that have been cut down and you haul them away yourself to a portable mill.
Jerrell,

Didn't know about this. So googled HFH locally and found they have a store here in PDX, OR. Will be visiting them next week. Thanks for the tip.

Dick


Jerrell Sandling said:
I go to the local Habitat for Humanity store. Contractors often donate wood left over from projects (mostly molding) and sometimes you can find some good usable wood for a project. Cost is generally very affordable plus you help local charities. Hope it helps
I live in Minnesota and the Department of Natural Resources lists local saw mills on there web site. I also have bought some nice hardwood from Pallet manufacturers.

Good Luck.
Joe
You may also want to look for a saw mill in your area. I am able to get shorts and skinnys from a local guy for $10.00 bucks a pickup load. I have also bought wood from local farmers that have cleaned out their fence rows. Most of this is green and has to be dried. Another thing is watch for local auctions. I have found wood at estate auctions very cheap many times they will list the woodworking tools but not the lumber that is there. Last suggestion is old barns and out buildings. Many of these were built from very good lumber and recycleing it can be very economical. Put the word out to friends and relative that you are looking for old wood.
I have found free quality wood from several sources: a high-end shop that builds expensive windows, doors and frames which is happy to hand off excellent pieces, though the sizes depend on what the product is they're building at the time. They are happy to give it away because otherwise it is run through a chipper to reduce it for landfill: also find cheap or free hardwood on the internet from unwanted furniture. Last year obtained lovely maple sitting by the roadside on garbage day that I turned into a dining table. I have not found much wood of any use at Habitat for Humanity though I often buy other things, such as brass hinges etc. from them.
I find old hardwood from construction sites, contractors (who glady give me the scraps saves them on getting rid of it) and on pcs. I find on broken furniture people throw out. After I find what I need I take everything that has a finish on them to a place here called Poor Richards which strips them for me to bare wood . I have made soom beautiful pieces and did some great repair work with them. Just Think outside the box and look around you may be surprised at whats out there. With my time and som labor I save roughly 60% to 70 % on what it cost to buy at the store.
My trip to the Habitat Restore did not produce any significant hardwood. However, there is lots of trim molding available for reasonable prices. As mentioned elsewhere, there is a lot of small hardware pieces that might prove useful. If you are a landlord, this place would be a good source of material for repair or replacement projects.

Azor HomeatShop said:
Jerrell,

Didn't know about this. So googled HFH locally and found they have a store here in PDX, OR. Will be visiting them next week. Thanks for the tip.

Dick


Jerrell Sandling said:
I go to the local Habitat for Humanity store. Contractors often donate wood left over from projects (mostly molding) and sometimes you can find some good usable wood for a project. Cost is generally very affordable plus you help local charities. Hope it helps
Hey Jason,
It looks like everyone has run the gammut of sources and such for your question. When it comes to resourcing wood (especially pallet wood) I find it handy to run a metal detactor over it to check foir hidden fasteners. A friend of mine is an avid rock hound and I tried his high end detector with great results. That got me thinking. I wondered if a low-end unit would be as effective. Turns out, if you are careful where you set up to do the test (no underlying metal or hidden metalic stuff) even a cheap bottom of the barrel metal detector will find anything that will do significant damage to your saws, knives, etc.Check your local pawn shops if you poke around you can find a detector for less than $50. Hope this helps.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_