Kreg Owners' Community

The husky toolbox it's the 7 x 22 toolbox its $19.97 at Home Depot

I picked one up today all my clamps fit in the toolbox lots compartments for screws.  I only use the screws for 3/4 and 1 1/2. Nice compartment for countersink and screw bits and common drill bits.  Nice long slot for  pencils.

Views: 2230

Reply to This

Replies to This Discussion

I found this 23" model at Sears---SPECIAL price $10!

Product Image

Gary,

HD has the "Wide Body", (larger size),  22x13x10.6" box---

 (holding capacity of 3125 cu. in)---

 for $25.

Husky 22 in. Wide Body Tool Box

The 44lb weight capacity should hold all the Kreg Klamps nicely.

This is the kreg look alike. I'll post a picture .

Here is a picture of the toolbox from Home Depot. The top section has containers for different size screws.

Ah yes,

that's the 'ol ''cantilever'' box.

Different from what appeared when I looked up their 7x22 tool box.

Husky was the sponsor of Matt Kenseth's winning car this past weekend at Kansas Speedway.

Go Matt.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_