Since building the tiered planter I found I need a bigger work surface but I want drawers to hold my cordless tools. I have a drill, driver, reciprecating saw, multi-tool, circular saw and a flash light which all came as a kit. I also have a cordless nailer too. Then I need another drawer to hold my batteries. What material for the drawer bottom should I use to support the weight and what type of drawer system should I choose?
Tags:
This is what I have been doing for the last 5 years and nock on wood havent had a dresser drawer come back yet.But I dont use pocket joinery the drawer’s are to havey for poeple with children so I use 3/4” ply wood for the front and back and for the side’s I use 1/2” ply wood and I predrill hole’s in both end of the 1/2” and then I run a dado 3/8” form the bottom and 1/4” deep then I glue and scerw and a clamp helps.And belevie me I a big Kregs fan.
When I build my workbench I figured I was going to put my hammer drill and my other cord drill in one of the drawers. I used 1x4 stock like pine for the sides and back. I used a finished piece for my front where I have my pull handle screwed on. I also made a dado channel and cut a square piece of 1x4 down to 3/4" square and screwed it to the drawers. My drawers run nice and smooth. The drawers run like the drawers on a metal tool box. I would use the pocket hole jig for the bench itself and use what David and I did for your drawers because your workbench drawers are going to take a beating. You are doing to be in them a lot while working on things. I know I am in my drawers and they held up great and my neighbor likes my drawers on my bench too. When I made the channels I made them a little wider than normal for wood movement. I also used some left over 1/2" plywood for the bottom of my drawers in my workbench.
David,
I just picked up a router and will pick up a router table soon. I'll practice the dado since I've never done those before. You're drawers look awesome! Thanks for the information.
David Dean said:
This is what I have been doing for the last 5 years and nock on wood havent had a dresser drawer come back yet.But I dont use pocket joinery the drawer’s are to havey for poeple with children so I use 3/4” ply wood for the front and back and for the side’s I use 1/2” ply wood and I predrill hole’s in both end of the 1/2” and then I run a dado 3/8” form the bottom and 1/4” deep then I glue and scerw and a clamp helps.And belevie me I a big Kregs fan.
Leslee,
Thank you for the information. I'll starting hunting down the materials and piece together a prototype to get myself familiar with the process. Thanks again for the information!
Leslee said:
When I build my workbench I figured I was going to put my hammer drill and my other cord drill in one of the drawers. I used 1x4 stock like pine for the sides and back. I used a finished piece for my front where I have my pull handle screwed on. I also made a dado channel and cut a square piece of 1x4 down to 3/4" square and screwed it to the drawers. My drawers run nice and smooth. The drawers run like the drawers on a metal tool box. I would use the pocket hole jig for the bench itself and use what David and I did for your drawers because your workbench drawers are going to take a beating. You are doing to be in them a lot while working on things. I know I am in my drawers and they held up great and my neighbor likes my drawers on my bench too. When I made the channels I made them a little wider than normal for wood movement. I also used some left over 1/2" plywood for the bottom of my drawers in my workbench.
For drawers that will carry a lot of weight, I'd install ''under-drawer'' type slides.
Another option, is to install a removable plastic storage bin,
like a Rubbermaid roughneck container, 10-14 gal size,
in the deeper drawer(s)---
the entire container and be removed, with its contents, for load-and-go tasks.
Regarding larger work surface, I use a pool table covered with two 3/4" pieces of plywood. The top piece having a melamine surface. So my work surface is 4'x8'. Sometimes that is not even big enough. (pool table was left here by one of my son's......."and I don't throw nuthin' out"
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service