Kreg Owners' Community

have any of you used "Milk Paint" to finish any of your projects? And then have you "destressed it" (thats the way it was spelled on DIY Network). I wanting to go with a dark blue and a vey dark green.  Any ideas or help?  Oh, yes and bu y the way: I am extreamly colour blind, but people tell me these are the colours to go with. Thank you

 

Rick Kiot

Views: 340

Reply to This

Replies to This Discussion

Which brand of milk paint do you plan on using?

This is a wine hutch I finished about a month ago .It is federal blue  under Red Pepper  thinned like ink to drag it over the blue so it lets blue fade through.Then I  made worm holes on flat surfaces plus beat it up with chains

Nice thing about it that you control the richness or not so rich of color by adding more or less water

Very nice, Jens.

Jens Jensen said:

This is a wine hutch I finished about a month ago .It is federal blue  under Red Pepper  thinned like ink to drag it over the blue so it lets blue fade through.Then I  made worm holes on flat surfaces plus beat it up with chains

Many painstaking hours on it .It dont look like it but beleave me when your slow it is time consuming

the only furniture finishing formula I no is making paint stripper and his is getting harder and harder to find products to do so. But if I find some here again I make it for around 1.50 -2.00 a gallon

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_