Hi all this maybe of interest to david niebelings [upside of a small shop].This is my little 12x12 shop here in the uk. Its fully insulated including the floor ,has a skylight and double glazed.Nice and warm in winter.
Tags:
Comment
That is an impressive amount of tools in a small space. My local goverment regulations say that I am limited to a 12x12 shed, I'm currently setup in my garage but it would be nice to have my garage back. I look forward to seeing your setup!
Oh i all most forgot my KREG router table which you can see on my profile picture ,which was taken in my shop.
Hi justin betters ,will post some pictures of my little shops interior as soon as i can.It has a fold down work bench ,and most machines on wheels to make better use of the space.The machines in my shop are; a thicknesser /planer ,bandsaw, dewalt table saw,a metabo mitre saw,a pillar drill,morticer,a compressor/nail gun,a scroll saw,and a dust extractor.So you can have it all with some careful planning,the only thing i cannot have is a large laying out table.Any big projects have to be assembled outside ,not good with U.K.weather.
Any pictures of the inside?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community