Two table saws (both 10-inch), two band saw (12-inch and 14-inch), two miter saws (12-inch and 15-inch), and two lathes. I gotta down size, but can't find anyone that wants to buy my excess. Alot of my early tools were pawn shop buys; that's where one of the band saws and the jointer came from. And the Sear repair store always had some great buys (drills, recip saw, routers, and compressor). Don't get me started on my sanders and I'm still trying to find parts for the blade holder to my Delta scroll saw. Yes, I'm a tool junkie.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
Timothy Laynor's Comments
Comment Wall (2 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Two table saws (both 10-inch), two band saw (12-inch and 14-inch), two miter saws (12-inch and 15-inch), and two lathes. I gotta down size, but can't find anyone that wants to buy my excess. Alot of my early tools were pawn shop buys; that's where one of the band saws and the jointer came from. And the Sear repair store always had some great buys (drills, recip saw, routers, and compressor). Don't get me started on my sanders and I'm still trying to find parts for the blade holder to my Delta scroll saw. Yes, I'm a tool junkie.
Welcome Tim,
Seven routers!--- I'd say that's a good start.
Welcome to
Kreg Owners' Community
Sign Up
or Sign In
Or sign in with:
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Kreg Workbench Weight?
Videos
Miter Saw Workbench
Added by Mike Criss
The Ottoman with Secret
Added by Alex DrMaster
How to Build a Shaker Fireplace Surround - Woodworking
Added by Philip Miller
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service