Kreg Owners' Community

Has in fact used them, they look more like a pain in the butt  in most cases but on some things i do see  a value of using them... I only ask as I'm always researching and looking for new toys :)

http://www.blokkz.com/

~ekm

Views: 601

Reply to This

Replies to This Discussion

Mike,

Go-For-It.

They appear very handy, for some tasks.

I've seen them in use,

they looked effective.

They're on the "Want List".

i got lots on the want list lol...........i do find the neoprene shims  a bit cheap tho..... but i do get the reasoning.

The pads will be needed for some tasks.

The waffle non-slip router matt, is very effective for many tasks.

Cut-to-size, to suit your needs.

Non-Slip Router Mat

They look like they could be useful, but, at $25/pair are a bit spendy. Could probably build all these jigs for that

http://benchnotes.com/Wedge%20Clamps/wedge_clamps.htm

 

Here's my project for this coming week

John,

I agree, a bit spendy.

When on a job site, or making up one frame, or the like, and one needs a clamp to make a quick assy, as well as the DYI making an assy, the Blokkz tool is handy.

Jigs are great, for repetitive operations.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_