Kreg Owners' Community

Anyone interested in the chest plans feel free to contact me. I have a local place I get my lumber from that's very reasonable so the prices may fluctuate based on that, but it takes roughly 16 board feet to make minus the top. If a solid top it takes roughly 20 board feet. The ones I made out of oak I used a 3/4 in ply topped wrapped in solid oak banding that worked out with a 3/8 roundover. You can use rail and stiles for the panels or for flat panels I use 1/4 in. ply and a slotting bit on my router. The chest measures 22x42x18. A chest out of oak generally runs about $150 and cherry $175, I have made 3 this year, one as a hope chest for my 18 year old daughter and 2 for friends for their wives for Christmas. Rockler has brass plates that I have put on them with the names and Christmas 2009. Here's a material list to start:
16 to 20 bd ft lumber
2 boxes of tongue and groove cedar lining (takes almost the whole 30 sq ft.)
1 30 in. piano hinge
1 lid support
2 2x4 1/4 in. oak ply (if cherry, i used rockler for cherry veneer packs $15)
1 2x4 3/8 in MDF (for bottom)
KREG JIG and screws!!!

Views: 4954

Attachments:

Reply to This

Replies to This Discussion

i know its an old post, but could I get a copy of the plans too?

joakes1@windstream.net

Justin- Nice work with the chest! Are you able to e-mail the plans to me... Jason_eure@hotmail.com

Thanks for sharing.

Man that's beautiful. I would love the plans if possible. Email is: c_loughridge@yahoo.com. Thanks in advance!

Like everyone I would really appreciate the plans for this chest.  Thanks

catnapranch@ymail.com

I would love to have those plans! Drugcoder@icloud.com

Thats such a nice chest

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_