Just seeing who purchased some gifts that no one wants or who built something to last for years
Tags:
Jens,
I started with a pencil sharpener but didn't like the angle it was cutting. Finally wised up and chucked each one up in the cordless drill and ran them across a rasp clamped to the bench and then sandpaper. I think I saw a tool for that task at my favorite tool shop. May have to go invest in one before I tackle one of these again. Merry Christmas.
Yep tha'st what I was going to mention also. I no when I make my pocket plugs for some reason Kreg drill and dowels I use are just a slightest bit off so I chuck up drill and dowel and spin it in sandpaper just to get a tiny bit of wood off.
I made several personalized name plates and signs, for family members.
Each was hand-crafted, carved, and finished.
It took up more time than I originally planned.
Ken; you may want to check out a site called stantonfurniture.com
they don't have plans, they are just a furniture web-site, but if you are looking for some Mission style furniture, this place has got some really beautiful pieces. It might be worth a look-see
Leonard,
The next time I go to Portland, I'll check 'em out.
leonard haag said:
Ken; you may want to check out a site called stantonfurniture.com
they don't have plans, they are just a furniture web-site, but if you are looking for some Mission style furniture, this place has got some really beautiful pieces. It might be worth a look-see
Built this workbench for my son-in-law. My first Kreg project. Nice gift for him and learning experience for me. Applying edging to mdf can be a pain. After several failed tests, I managed to glue and and brad gun the edging without blowing out the edge.
Merry Christmas to you Dave.That is a very nice looking workbench and being ii is your first project means all the more to the giver and receiver. What problem did you have with edging?
Keep projects coming we all like to see advancements in woodworking over period of time. Personaly I no my attempts have gotten better as I keep pluggin away. (Not any pun in pluggin)
Thnaks Jens. I appreciate your compliments. Read that edge fastening to mdf was problematic. How true. It tends to split. I was using two layers and glued and shot the 3/4 edging with a 1 1/4 brad nailer. That worked fine. My tests with screws and nails failed. Probably pilot holes to small. It all worked out and a learning experience.
David,
I wouldn't use metal fasteners for that applicaton---
potential problems later,
such as when using chisels, or equiv tools,
they'll get damaged.
I'd attached the edging with biscuits or spline joinery and glue-up.
Ken,
Thanks for the advice. Since I don't have a biscuit joiner, I didn't think of that. Sounds like I may have to buy another toy. Darn!!!
David,
If you don't have a biscuit joiner, then use ''spline joinery''.
The grooves can be made with a router.
David Kessel said:
Ken,
Thanks for the advice. Since I don't have a biscuit joiner, I didn't think of that. Sounds like I may have to buy another toy. Darn!!!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service