Kreg Owners' Community

Hi Kreg!  I asked "Santa" for  new Kreg Toolboxx for Christmas and he can't find one and neither can I.  I don't want the $220 one, I already have that stuff.  I want the $60 to keep all of my Kreg stuff in one spot.  Everyone says out of stock.  Any idea where or when they might be available again?

Thanks!

Views: 2396

Reply to This

Replies to This Discussion

I was @ my local Woodcraft store around Thanksgiving. They had just sold there last one, but checked through there system & were able to tell me the quantity in all of the nearest Woodcrft stores. I then went home & found that Amazon.com had them (shipped from Rockler) which still had some last week when I checked. Have you check any of those sources?

Paula,

Good old Sears has one just a bit smaller and so is the price.

http://www.sears.com/shc/s/p_10153_12605_00921111000P?prdNo=7&b...

I was just @ my local Woodcraft store.  They have 7 more Kreg Toolboxx screw kits left.   I don't know if they ship.  But, if you are close to Washington, DC Here is the info:

4950 Wyaconda Road

Rockville MD 20852
Phone: (301) 984-9033
Fax: (301) 984-8125
rockville-retail@woodcraft.com
Hours: Monday: 10:00:AM - 9:00:PM
Tuesday: 10:00:AM - 9:00:PM
Wednesday: 10:00:AM - 9:00:PM
Thursday: 10:00:AM - 9:00:PM
Friday: 10:00:AM - 9:00:PM
Saturday: 10:00:AM - 6:00:PM
Sunday: 10:00:AM - 5:00:PM
Directions: From I-270, take the Montrose Road exit - East. Follow Montrose and turn right at Parklawn at the third traffic light after crossing Rockville Pike (Rt 355). Turn left onto Boiling Brook. At the second stop sign turn right at Schuylkill Rd. and turn right on Wyaconda Rd (one block) and turn left into the large parking lot. Look for The Woodworkers Club awning, straight ahead.

Just found this, apparently still available for internet order

http://www.hartvilletool.com/product/5322/new-tools-from-hartville-...

I wanted to thank all of you that responded to this post and let you know that Santa brought me the Husky toolbox from Home Depot and I love it.  I have either been nursing or been ill myself since Christmas so I don't have all of my Kreg things in it yet but I will.  Thanks again to everyone for the helpful advice.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_