Hi Kreg! I asked "Santa" for new Kreg Toolboxx for Christmas and he can't find one and neither can I. I don't want the $220 one, I already have that stuff. I want the $60 to keep all of my Kreg stuff in one spot. Everyone says out of stock. Any idea where or when they might be available again?
Thanks!
Tags:
Paula,
If anyone can find it, Santa can!
In all seriousness, when we launched the Toolboxx we put 'for a limited time only' in large prominent letters because we knew they were going to fly out the door. Unfortunately at this time the Toolboxx is simply a limited time promotional item and even though we made a lot of them, the vast majority sold through very quickly. There are no immediate plans to produce more. Your best bet is to make phone calls around to a variety of dealers and see if you can find one or two left.
Good luck, I hope Santa comes through for you!
Derek
Anthony, thank you so much. I will check it out and let Santa know!
In addition to the model that Anthony found they have another mode that is just about the exact dimensions as the Kreg Box. Model 17185073 Same price as the one Anthony mentioned, but instead of 9 inches deep its about 6 1/2" deep.
Thanks Bret!
Ok guys, I just checked it out and I think it is perfect! I have passed the message along to Santa! Thanks again!
Paula, I went to our local Woodcraft store and they still had several of both kind. Try woodcraft.com and put in your area and you may could find one. Good luck, I hope to get one for Christmas also.I've been good.
The wood craft in Houston still has some, seen 10 or so yesterday. I have been using the husky box that was mentioned above for the last 2 years. It is the same box except it comes with bottom containers
Just got an e-mail flyer from Higland Woodworking advertising the things. "While supplies last". It's the full kit though, not just the box. Box only is "sold out"
http://www.highlandwoodworking.com/kreg-toolboxx-complete-system.aspx
Paula,
Check out ''Rocklers''.
They have a supply on hand.
Hey Paula, Try woodcraft.com. I visited our local store in SC and they still had several of each box. I'm also hoping to get just the box for Christmas. Good luck and hope you have a Merry Christmas.
I don't know if this will help, but I got mine on Amazon.com
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service