Has anyone ever antiqued brass Im having problem locating antique brass parts for my steamers.I can find some stuff but not all.No Rockler dont have everything in antique finish
Tags:
most brass hardware you find is plated & the plating is pretty thin, any attempts to antique it strips the plating.
this is where i've gotten stuff from: http://www.vandykes.com or http://www.restorationhardware.com
mandodad
most brass hardware you find is plated & the plating is pretty thin, any attempts to antique it strips the plating.
this is where i've gotten stuff from: http://www.vandykes.com or http://www.restorationhardware.com
mandodad
Hi Jens,
I've heard white vinegar works well- never tried it though..
Hi Jens,
I've heard white vinegar works well- never tried it though..
Try this place.
They have all the patina's you could ever imagine. My favorite is Japanese Brown.
There are a variety of ways to add a patina to brass hardware. Vinegar is one way. Just wash the parts in vinegar and let dry.
Look at this sitefor more information.
Thanks Brass M this is a great site
That is a nice finish for sure ,Thanks
chilesdavid1 said:
Try this place.
They have all the patina's you could ever imagine. My favorite is Japanese Brown.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service