"Whether you’re building a new deck or refinishing an old one, you want to do the job right. With the Kreg Deck Jig™ – and a few simple tools you already own – you can create a beautiful and functional deck surface, completely free of exposed fasteners and painful splinters! Traditional concealed-decking systems utilize awkward steel fasteners or thin plastic clips to hold your deck boards in place. The Kreg Deck Jig™ utilizes a more straight forward approach, creating an incredibly strong wood-to-wood bondthrough precisely placed self-tapping screws.
Layout Mitered Corners, Set 3/16" Reveals, Transfer Measurements, Align / Square Your Projects, Set Bit / Blade Heights, Layout Wall Studs, Use as a Basic Rule, Marking for Layout, Use as a Simple Level"
Tags:
Saw an add for the DeckJig in the Family Handyman... Happened to be in woodcraft last night and was pleasantly surprised to see it on the shelf.
I am adding on to our deck and wanted a concealed fastener system... This looked to fit the bill. Only concern now... I do my deck boards at 45 degrees. Being that it has the two 45 degree drill ports I figured that would be the way to go... the video that comes with the unit still suggests using the center hole though.... weird.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service