Tags:
Hi Gary - I've used a V120 for a little over a year now. Thing is dead bang on once you get it initially set up. Has a positive stop every 1* with special stop at 22.5* both ways. I guess it's not a positive stop in the usual sense, there are little "teeth" cut in every degree with a little latch that engages them locking it in place. I coupled it with a MLCS extension fence that gets me out to about 35". If I could have gotten the 1000 for $120 at the time I would have gone that route as I have nearly that much tied up in my rig.
One I really like is the Osbourne:
http://www.osbornemfg.com/close-up.htm
Only thing about it Is it looks like it would be a PIA on a contractor saw with the short infeed area but would really shine on a cabinet.
Good Luck :)
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service