Tags:
Hi ray a friend of mine used gutter stock for his window boxes its alread painted and will last along time.You might get 3 window boxs for the price of one trex board.
thses was made of plywood and they lasted 2 years.
Dave
Here is example how to keep wood boxes from rotting out.I put plastic liners in them so all you do is build 4 walls and set the liner on top of rim
The all ceder one was built last summer and what the owners are doing there is using 6 inch plant pots and setting them on bottom of planter and putting mulch around them
thanks for your ideas, after all these ideas I've been getting I think I'm going to go with a solid wood boxes with plastic boxes inside of them. I'm thinking about maybe making them with some sort of a raised panel in the front. I'll post pictures as I make them
The boxes we have right now are plastic, so all that Ihave to do is make a shell for them to fit down inside of
Jens Jensen said:Here is example how to keep wood boxes from rotting out.I put plastic liners in them so all you do is build 4 walls and set the liner on top of rim
The all ceder one was built last summer and what the owners are doing there is using 6 inch plant pots and setting them on bottom of planter and putting mulch around them
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service