On Saturday, I noticed I'm about to polish off my second box of course thread screws. That's a ton of projects under my belt, I'd say.
How many boxes of screws have you gone through?
Tags:
Since I started counting...
3 -2 1/2" inch blue coated exterior
6 -1 1/4" coarse
3- 1 1/4" fine
1- 1" fine
and a few boxes of 2 1/2" and 1 1/4" exterior star tipped that I used when I ran out of Kreg screws. This did not work so well. I didn't have a long star tipped bit and used a collar.
Yes! ha ha Swing did take many many screws. But the "Big Mama" work table including the two end pieces took a truckload!
I haven't found a source close to me that sells the big boxes. I have to buy the small ones from lowes. I would have them shipped but shipping costs are high.
I would love to find somewhere to purchase the big boxes.
(And BTW, I know roughly how many boxes I have gone through because I like to keep a cost estimate on each project and include the screws.)
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service