Kreg Owners' Community

WHAT TABLE SAW DO YOU OWN ?AND WHAT DO YOU LIKE MOST ABOUT IT ? RATING OUT OF 5!

Views: 16670

Reply to This

Replies to This Discussion

I can't wait!!!

RMK said:
Justin: like Tim Allen would say "oh-ho-ho-ho-ho"    Look forward to your review 
great saw :)
I am taking a stab in the dark though, it's new and no reviews so far.  The older one got good reviews, so we will see!
when a product is new after 1-2 years there is reviews on it :)

I have a Delta 10" contractor's saw. It has a roll around frame with extended table with a combination Router table, and or a base for a Bosch jigsaw on the right table, a removable rear table extention, a cast iron side table with a complete router table with crank up router riser, a pair of drawers under the right side extention, and heavy hooks to hang several of my Tablesaw jigs on. All of the attchments and the saw is hooked up to a dust collection system. I bought the saw from a deceased friend's wife, and the only thing the saw had cut was my old friend's finger, on his first cut, and was never used after. I will send a picture later.

Lowell

 I own the powermatic 72 12inch 5hp extensions and router table set up I give this saw a 5

I currently own a Craftsman bench top saw mounted ot the supplied stand with supplied casters. My family gave it to me for a birthday a few years ago. It is ok and on a scale of 1 to 5 it is a 2 .  After a few years of use I can say that it is really a problem of too light to hold up and maintain it's setting. Calls on me to use extra care in setup and in rechecking.

 

Good thing it slows me down and makes me think. So maybe it isn't that bad.

Loweel.D. I would like to see the picture of  your set up, a missfortune on one's behalf  became a fortune for you!

Hi, Joe,

I intend to clean it up tomorrow, and take a picture of it. I use it almost every day, and it needs a sweeping.

Lowell

I wish I would have had the Sawstop 3 weeks ago. I probaply wouldn't have chunks missing from my fingers now.

Joe Pack said:
Didn't do the finger test...too chicken.  But I did stand beside the SawStop guy when he pushed the 3/4" ply and hotdog into the blade at normal cutting speed.  Bang!!!!  The skin of the hotdog was scratched and the cut was maybe 1/16" deep!  For a few dollars more than a Unisaw or Powermatic, I figured my fingers were worth that!  :-)))

kenny from Sundre said:


Joe Pack said:
SawStop 3hp.  Best saw I have ever used, even without the safety feature.  5 of 5.
You lucky dog!! Did you do the finger test???
Ridgid TS3660.  Got this baby for $300 new at the TTI factory tool sale.  Lifetime warranty.  A great saw at any price.
Attachments:

Here is my table saw, a 10" Delta combination 10" table saw/Jig saw/2 station joiner. It has a Joiner station mounted in a Bench Dog cast iron table, with a Router raiser, Two storage drawers, a rear Table extention that can be put on or taken off in about a minuit, switches for all tools, and a complete dust system hook ups for the tools. The saw came to me with the roll around base, and right hand table extention. I have added the right hand Jig saw/ router station and inlaid the slots for the joiner fence and miter gauge. I built the right hand router station fence, rear extention, added hooks for tools and many of the jigs that I have built, and many other things over several years, but, I think I am finally done adding and changing things. I have thought of showing pictures of all the Jigs also.

Lowell Sites

[IMG]http://img.photobucket.com/albums/v461/Chubbo/0001-1.jpg[/IMG]

[IMG]http://img.photobucket.com/albums/v461/Chubbo/0002.jpg[/IMG]

[IMG]http://img.photobucket.com/albums/v461/Chubbo/0003.jpg[/IMG]

[IMG]http://img.photobucket.com/albums/v461/Chubbo/0006.jpg[/IMG]

[IMG]http://img.photobucket.com/albums/v461/Chubbo/0007.jpg[/IMG]

[IMG]http://img.photobucket.com/albums/v461/Chubbo/0004.jpg[/IMG]

 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_