Tags:
I'm still amazed that it was just a silly 28 cent part that kept me from using that saw. LOL
I have the Shop Fox Aluma Classic. I found this online and it gives you an idea http://toolsandmore.us/shop-fox-w1716-aluma-classic-fence.aspx Though "won't destroy my budget" is relative to your budget. I think this add on is $225. I know that Incra has something as well. I don't think Kreg makes anything for Table Saws, though I don't know why. The router fence thoughts could easily be adapted to the TS, similar to what Incra has done.
I know the whole issue can be frustrating. You are right to consider the solution. I will say that if I had everything to do over, I would have gone with the EZ Smart system from EurekaZone from the beginning. Their table and bridge is as accurate as the table saw, more versatile, much safer, and much more mobile. You will invest about $1700 total, but be happier in the long run. I have the system but not the table. I can not tell you how many times I wished I could have my table saw on site, or just outside in the front of the house instead of the basement. The bigger the sheet goods the more mobile matters. That mobile thing is worth quite a bit to me. The accuracy of the Aluma fence and the EZ Smart are equal, and that means a lot to me as well. The cheap fence that came with the old contractor type table saws were more of a safety hazard than a help with cutting. I was so happy to get rid of mine. Before you get a new fence, you might want to think about the the entire system. Grizzly has a starter table saw, with an Aluma Classic fence for $635 ( just tossing out ideas since I do not know your allocated budget).
Who knows? Maybe someone has a fence jig plan??
Phil B.
I'm still amazed that it was just a silly 28 cent part that kept me from using that saw. LOL
It was 28 cents for a retaining ring to keep the elevation shaft in place. Without it, the blade would drop down below the table line during use. Now, it stays in place.
As for the fence I ordered, it's still in transit. I was hoping it would arrive today, but no dice. I keep playing the waiting game...
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service