Kreg Jig Set Up

Comment

Comment by Jason on May 17, 2023 at 1:57pm

Hello Terry, No I don't have plans. I just kind of winged it. I matched the size of the cart it is on. One thing I would do differently though; I would not make the top open and make drawers instead. Hope this helps.

The final dimension were 17x30 only because thats the size of the table top and also made it low enough to still fit under my bigger work bench so I used 1x3 pine.

Comment by Terry Jensen on May 7, 2023 at 12:28pm

Do you have plans for this?

Comment by Gilles Alix on November 9, 2020 at 12:13am

Est-ce possible d'avoir les dimensions et quel sorte de bois que vous avez utilisé ?

Comment by charles Gonzalez on July 12, 2014 at 9:59pm

looks really nice man does the jig itself fit inside when you put it away or is it permanently mounted?

Comment by Jason on June 3, 2014 at 10:58pm

Hey Rick,

Some else had suggested draws as well. That is a great idea!

Comment by RICK WILLARD on June 2, 2014 at 3:55am

I like the flip top also but How about a pullout for the tools you need while jig is in use  

Comment by Rick Hawkins on May 28, 2014 at 8:52pm

Very Nice Jig and I can see that it would be great to have one myself. I am looking at it along with the information you shared. I am thinking about doing myself one.

Comment by Jason on May 28, 2014 at 8:24pm

Paul-

The final dimension were 17x30 only because thats the size of the table top and also made it low enough to still fit under my bigger work bench so I used 1x3 pine.

Robert-

Good question

The only problem I ran into was the hinge because I've never done one. I had to file down the area were the hinge is, like you would do on a door. Make sure you will still be able to clamp your jig after it's in place. Also some have suggested making pull out drawers instead so the top can stay down while working. Thats sounds cool but I like the flip open idea myself. Look forward to seeing what you guys do!

Comment by Paul Rose on May 28, 2014 at 2:07pm

Looks great. What are the dimensions of the final product

Comment by Robert Stebbins on May 28, 2014 at 11:39am

Nice work. Looking to build one this weekend. Any pitfalls to watch out for?