I created this box to store my Kreg Jig, screws, and all other accessories. I chose to not attach the Jig to the top because I wanted it to be easily moved around as needed. The end compartment is big enough to hold clamps and anything else. I added about 4 1/2" inch base to the one compartment to make it easier to access the hex wrench, drill bit and square drivers. There is plenty of space for the various sized screws and a space for extra attachments. The wood is all 1/2" oak plywood. I will be adding a nice stain at a later time.
Comment
I am a new wood worker and am "trying To set up my workshop in the now spare bedroom
since the kids have all moved out and onward, i too am.
I am looking for the plans for the Kreg Jig Station as well as a portable Miter Saw with Dust Collection Setup.
I am learning everyday and find myself taken with the pure beauty of wood .
I look forward to learning & sharing my new path of woodworking (for beginners)
The one thing i have learned so far is organization is an absolute must because
Who knew there were so many So So many different "tools-screws-attahements-bits-jigs..etc"
if anyone has any information in reference to the Kreg station or miter table i would say
Thank you in advance and look forward to "working" with you.
Sincerely excited and a bit overwhelmed but positive to start my new
project.
Kimber
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community