Attaching 4x4 legs to a 2x4 apron on a 7 ft table.Is either of these solutions significantly better than the other ...?A) 2 or 3 pocket holes from the apron into the 4x4's using 2 1/2" screws, and…Continue
Started this discussion. Last reply by Shift Jun 24, 2012.
Just finished putting together a 7' table top using 2x6 pine. It's the first table i've ever built, so I'm learning as i go, and making mistakes. There are some small gaps between boards, and the…Continue
Tags: table
Started this discussion. Last reply by Ken Darga Jun 23, 2012.
I'm about to start build a harvest table using 2" (1.5") pine ...Lots of people suggest backing out the screws a bit when joining the table top to avoid cupping allow for seasonal movement.My…Continue
Started this discussion. Last reply by Ken Darga Jul 30, 2012.
I bought a Kreg Jig a couple of weeks ago, and I'm having real difficulties making a decent joint. I'm trying to make a simple right angle joint that looks like: L with the pocket holes on the inside…Continue
Started this discussion. Last reply by Andrew I Harding Mar 4, 2012.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community