I really didn't have any plans, just kind of worked things out as I went. I used the idea from LL Bean: http://www.llbean.com/webapp/wcs/stores/servlet/CategoryDisplay?categoryId=56831&storeId=1&catalogId=1&langId=-1&from=SR&feat=sr
I actually started with one idea in mind, that is to follow the LL Bean design and changed it several times. I built the shelves and put them in place before I put the finish on and my wife wanted several things changed, so I did and I'm glad I did, they turned out better. Anyway, all that is to say I really didn't have specific plans, just an idea that kept changing. I made the stand wider than LL Bean and the shelves a little shorter. The step by step photos may help.
Rod, I have been looking at youalbums and you do so very good work! Maybe with time and some experience I will be able to do as good as you. Projects are not going to be an easy thing to do. I have had a couple of Strokes, but I can use all of my extremities and mind. I am just a lot slower than most.
Thanks for returning my request. Rod it is nice to meet you. I am interested in your TV stand. Do you have any plans or drawings that would show any demensions? I am only interested in the TV stand. If you have any plans would you share them with me?
You can reach me at my email; email@example.com. I live in the Phoenix Arizona area.
The Kreg Concealed Hinge Jig has a setting for the distance from edge of the door to the nearest edge of the 35 mm cup hole. This can be set as 3, 4, 5, or 6 mm.Later in the instruction there is a table that converts the distance from the edge of…Continue
I have an old Rip-Cut which I bought many years ago but did not set. I seem to have lost the instructions, if I ever had them.I cannot figure out which bolts are match with the nylon-lock screws.This unit is old enough that the current instructions…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…