When working with 1/2" material and the K5 system, you will want to ensure that your drill guide block is set to the 1/2" setting. Then using the setup block, you will want to have the tip of the bit going through the…"
Thank you for reaching out to us on the issues you are having. I was curious if you could send us some pictures of the issues with the Rip-Cut. We just want to verify that it is set up correctly as we have not heard of this…"
The main difference between the PRS1020 and the PRS1025 is that the PRS1025 will have a key hole at the end of the slot in the table to easily allow you to remove the fence. Without this slot you would have to completely remove…"
The issue you are referring to is due to your dust collection hose trying to attach over the outside of the dust collection attachment. It is designed to go inside of the opening allowing the friction of this joint to hold it in…"
The table top is not designed to be a completely flat surface. It is designed to be a working surface and not a flat surface to be measured against. While clamping your work pieces the material will be flat against the…"
Unfortunately the plugs are designed to be used with material that is 3/4" - 1 1/4". If working with 1 1/2" material you can purchase some 3/8" dowel and create your own plugs. This would allow you to set…"
Thank you for your input. With the dust collection attachment on the jig itself you can unscrew the index pin, though it is not as easy as without the dust collection attached. The notched rim of this pin allows you to run…"
I'm sorry to inform you that we do not offer a kit like you are referring to. I have heard of our customer's doing this but they did not supply us with a list of parts to do so. If you do decide to do this, please…"
Thank you for the suggestion. Unfortunately we do not offer a pin like you are referring to at this time. If you are having issues with removing the pin, you can try slightly lifting up on the drill guide block as you rotate…"
The pocket hole plugs are designed to be use in material that ranges from 3/4"-11/4" thick. This is the reason that with 1 1/2" material your plugs are sitting below the surface. As Ken described below, you can…"
I'm sorry to inform you that we do not recommend using other drill bits with our jig. The bit was specifically designed to fit into the jig to support it while drilling. If you were to use a collar to make up the…"
Ken would be correct in the actual opening size from the pad to the tip. However, since the tip will be in the pocket hole itself it will give you the 5" reach our website states. However, with the project you are…"
Depending on the density of the hardwood you are using, the coarse threaded screws should work. However, it could cause your material to split. A safer option would be to set the jig up for 3/4" material and then use…"
"Hi there do you have a conversion sheet from imperial to metric i can print and one in metric only PLEASE.
K4 Jig K4 Master System
Hi i am almost 54 and love working with my hands, whether its steel or wood and have quite a bit of tool for both…"
Have You Ever Though About Hooking Up With David Venable On QVC To Sell Your Kreg Jigs? A lot Of People Would Buy Your Items That Do Not Know About Your Jig!! QVC Reaches Out To Millions Of People You Can't, And Don't Reach!!
I wish I would have known before purchasing what I did that the Bench Klamp would not work with the Mini-Trak.I dont think I saw anything in the description stating that. I would have considered buying the larger Trak instead or another accessory in place of the Bench Klamp that would be compatible.
After being disappointed with my Kreg Foreman I sold it and got a Porter Cable 560. It was a decent jig and performed with decent results. Then a friend who is also a Kreg dealer told me about the K5.i bought one and set it up. I must say it's…Continue
I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…