Hi fellow Pocket Holers,Please can I have the above angle.It can be the angle to the plane of entry or to the vertical.With this information I would be able to develop a bespoke reference table for…Continue
Started Mar 5, 2018
Hi There fellow pocket holers,I am working with 1 3/8" (35mm) hardwood (oak) stock.The Kreg Owners Manual says (or rather implies) that I should be using fine thread screws at 2" (51mm) …Continue
Tags: hardwood, screws, (51mm), inch, 2
Started this discussion. Last reply by Ken Kortch Mar 3, 2018.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community