Kreg Owners' Community

Doug
  • Lehighton, PA
  • United States
Share on Facebook
Share
 

Doug's Page

Latest Activity

Doug replied to Charlene Christensen's discussion 'Ideas to help hold 2x4 (and thicker) stock when joining'
"I use the Bessey wood clamps in the 4 packs from Home Depot.  I can clamp squared pieces of wood to hold the location of the piece with the kreg pocket holes.  That can keep the piece from moving while I fasten the Kreg screw.  Also I…"
Apr 26, 2017
Doug replied to Jerry Lewis's discussion 'Kitchen Cabinets'
"Leaving a couple of inches at the ends, pocket screws every 6 inches will hold the cabinet together.  Add  extra pocket holes if you think you need them. Tightened securely, the combined strength in al the joints hold the cabinet…"
Feb 21, 2017
Doug replied to Matthew Hinton's discussion 'Need advice on building an interior door'
"You could drill pocket screw holes into the 4 sides of the panels. Then the panel will be screwed into the rails and stiles. Or  you could cut slots on the rails and stiles with  dado blades or just a few passes on the table saw or with a…"
Feb 19, 2017
Doug replied to Bradley M. Small's discussion 'Stabalizing Clamped Joint to avoid movement when screwing'
"I put clamps around a project and have a square to keep the joints precise.  It is like the picture from the internet. "
Feb 17, 2017
Doug replied to Michele's discussion 'Screws not holding in 2x6 douglas fir'
"You should use a impact driver. That is what the cabinet installers use to screw kitchen cabinets into the studs in the kitchen wall.  After using a drill, one can find that one can take a screwdriver and still drive the screw futher…"
Feb 9, 2017
Doug replied to Michele's discussion 'Screws not holding in 2x6 douglas fir'
"It is just like mentioned. The pieces of wood have to be square on the edges where the wood is joined together. The rounded edges have to be cut off.  When I use the construction lumber from the big box store, I trim off the rounded…"
Feb 9, 2017

Profile Information

Which Kreg products do you own?
K4 Master System
How would you describe yourself?
Advanced Woodworker
How did you learn about the Kreg Owners' Community?
kregtool.com
What's one interesting fact about you, your life, your garage, shop, or home?
From a piece of scrap wood began years of woodworking

Comment Wall

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

  • No comments yet!
 
 
 

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

Back with Kreg 3 Replies

After being disappointed with my Kreg Foreman I sold it and got a Porter Cable 560. It was a decent jig and performed with decent results. Then a friend who is also a Kreg dealer told me about the K5.i bought one and set it up. I must say it's…Continue

Started by DaveTinley in Beginners' Zone. Last reply by KregCS on Wednesday.

spam 3 Replies

Did anybody get bs email from Timothy White about Your surname? He said he got my name from here.Continue

Started by Timothy Spoon in Beginners' Zone. Last reply by KregRep Apr 4.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_