Sorry no plans , but it was six sided , base was 36 " , the tower was 30 " and the house on top was 24 " across !!! The frame work was 3/4 " x 2 " and the platforms were all 3/4 " boards , the light came from Radio Shack, the glass was all double thick and it was 7 1/2 foot high . Did make the base removeable ,so they could get it through the door, hope this help,s , JIM !!
The Kreg Concealed Hinge Jig has a setting for the distance from edge of the door to the nearest edge of the 35 mm cup hole. This can be set as 3, 4, 5, or 6 mm.Later in the instruction there is a table that converts the distance from the edge of…Continue
I have an old Rip-Cut which I bought many years ago but did not set. I seem to have lost the instructions, if I ever had them.I cannot figure out which bolts are match with the nylon-lock screws.This unit is old enough that the current instructions…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…