"I use a small square to check when I adjust something on both my table saw and mitre saw. My mitre saw was a bit off from new. I have a digital square/level but that is a bit too big and a bit painful to set at 90."
"I would use the square pattern dog holes in my bench with a dog fence ( could use Kreg dogs also ) and Kreg inline clamps. Ratio to get to 45D is 1:1 so say 2 holes across and 2 holes up to place a dog and 5 holes across and 5 holes up to place the…"
"That thread has gone walk about.
I have gone with edge fitting and then offsetting the 16mm melamine side to avoid the screw heads fouling it. I also have a t-trak so I can clamp boxes that runs aprox 100mm from the clamp blocks. Works great if…"
"I have a composite decking floor in a garden shed fixed to steel, even out of direct sun and most of the weather it still contracts and expands.
While the deck jig puts the boards in nicely and the screws have a good hold and I think my shed would…"
"I used the Kreg Clamp Track and clamp blocks with Rockler T-track to use their inline clamps so I can use it to make boxes.
2nd bench will be drilled with 3/4 holes at 96mm centres with a downdraft box. I have a panel clamp system that will work…"
"Brad point is my choice.
Lately I have used a plastic cutting board, no splinters from that and it is easy to replace from the local $2 shop.
I would align the end with the rail and centred on the rail your drilling."
"If you don't like Loctite then either changing to a bolt or t-bolt would let you spin the clamp in place to retighten it, you may have to do some grinding to get them to slide and you do defeat the free 360 deg rotation."
"3/4 or 19mm is the Kreg standard hole size. Festool is 20mm as are most dogs from metric countries.
Kreg mobile work centre spacing is 4" I belive and Festool use 96mm with Kreg shelf pin Jig and Bosch guide rail at 32mm can do spaces at 64…"
After being disappointed with my Kreg Foreman I sold it and got a Porter Cable 560. It was a decent jig and performed with decent results. Then a friend who is also a Kreg dealer told me about the K5.i bought one and set it up. I must say it's…Continue
I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…