Not a Kreg project but knew there was knowledge here that could help. I have a friend that thought their dresser was real wood and started stripping the drawers to restain/refinish. After stripping…Continue
Started this discussion. Last reply by Elizabeth Leveques Dec 30, 2015.
In the process of refinishing a children's table for my grandkids. My question; I want to paint some letters and numbers around the top of it. To protect the letters and the table top can I poly over…Continue
Started this discussion. Last reply by Mandodad Oct 4, 2013.
OK This may be a stupid question for the experienced one's here but bear with me, and you can laugh that's fine also. All I ask is when you done laughing share some wisdom.Q; I may be interpreting…Continue
Started this discussion. Last reply by Ken Darga Oct 30, 2013.
My daughter in law had a desk in storage that she really liked and had for many years. It got damaged by water. My question for the infinite level of knowledge and wisdom on this site is, What is…Continue
Started this discussion. Last reply by Rick Dec 10, 2012.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall (2 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Hi Al , I have a craftsman planner and jointer and the both have worked well for me , the planner will take stock up to 6 " thick and 13 " wide !! I have run pine and oak through mine with no problems !!! I am sure there are better ones out there , just depend,s what you want to invest in one , would also check on the price of extra blades, hope this helps and have a great day , JIM !!!