Hi Adam. Sorry we missed your chat question. Generally, you will be unable to attach your saw if its tool plate is beveled. All you need to do is apply mild pressure to hold your saw in place. You should be able to obtain this before the black of the plate starts to rise. You can also cut a shim piece out of scrap wood and use it to square off the front of your plate so you can tighten in down more. If you try these things and still no luck, please contact Kreg Customer Service by phone at 800-447-8638 or online at https://www.kregtool.com/customer-service/contact-us.aspx?source=1677. Thanks!
Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue
Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom). Shelf holes in the walls are drilled 2" O.C. Like most store-bought…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…