Comments - Kreg Rip Cut - Kreg Owners' Community2024-03-28T20:52:54Zhttps://kregjig.ning.com/profiles/comment/feed?attachedTo=2900167%3ABlogPost%3A761649&xn_auth=noI have had my rip cut for ove…tag:kregjig.ning.com,2016-07-12:2900167:Comment:8335172016-07-12T10:27:19.929ZDennis Bakerhttps://kregjig.ning.com/profile/DennisBaker
<p>I have had my rip cut for over a year and I have used it many times with no issues at all. It does a great job for me.</p>
<p>I have had my rip cut for over a year and I have used it many times with no issues at all. It does a great job for me.</p> I would agree about the manuf…tag:kregjig.ning.com,2016-07-12:2900167:Comment:8335652016-07-12T08:08:23.552ZRichard L. McGlassonhttps://kregjig.ning.com/profile/RichardLMcGlasson
<p>I would agree about the manufacture of the Rip Cut, but I have not had problems with it. I have cut domestic hardwoods with it as long as 18'. It stayed true through the cut. My worst line did get I/8" off on a couple of cuts until I learned what I was doing wrong. I would suggest that you try it again. When you are away from the shop it can be of immense help I believe.</p>
<p>I would agree about the manufacture of the Rip Cut, but I have not had problems with it. I have cut domestic hardwoods with it as long as 18'. It stayed true through the cut. My worst line did get I/8" off on a couple of cuts until I learned what I was doing wrong. I would suggest that you try it again. When you are away from the shop it can be of immense help I believe.</p> I use a straight edge and cla…tag:kregjig.ning.com,2016-07-10:2900167:Comment:8332942016-07-10T11:16:58.827ZLawrence Katzhttps://kregjig.ning.com/profile/LawrenceKatz
I use a straight edge and clamps. Old fashioned but never lets you down.
I use a straight edge and clamps. Old fashioned but never lets you down. I have one and have not exper…tag:kregjig.ning.com,2016-06-12:2900167:Comment:8287312016-06-12T11:18:39.027ZKhanh Buihttps://kregjig.ning.com/profile/KhanhBui
I have one and have not experienced the issue you are having. However, I use it to rough cut my sheet goods. Though they are rough, I have measeaured them and they are pretty squared. I use the table saw to rip my wood to their final dimension.
I have one and have not experienced the issue you are having. However, I use it to rough cut my sheet goods. Though they are rough, I have measeaured them and they are pretty squared. I use the table saw to rip my wood to their final dimension. Rip cut is a nice tool, but h…tag:kregjig.ning.com,2016-03-11:2900167:Comment:8107952016-03-11T05:11:25.760ZChristopher Michauthttps://kregjig.ning.com/profile/ChristopherMichaut
<p>Rip cut is a nice tool, but honestly most of the prof.. guys just use the cheaply made and easy to use RIP-Guide made out of two pieces of wood and clamps!</p>
<p></p>
<p><a href="https://youtu.be/mwcOKX7PaRg" target="_blank">https://youtu.be/mwcOKX7PaRg</a></p>
<p>Rip cut is a nice tool, but honestly most of the prof.. guys just use the cheaply made and easy to use RIP-Guide made out of two pieces of wood and clamps!</p>
<p></p>
<p><a href="https://youtu.be/mwcOKX7PaRg" target="_blank">https://youtu.be/mwcOKX7PaRg</a></p> I'll buy it off you, no harm…tag:kregjig.ning.com,2016-01-24:2900167:Comment:8006122016-01-24T03:00:57.957ZVaehttps://kregjig.ning.com/profile/Vae
I'll buy it off you, no harm having 3 :).
I'll buy it off you, no harm having 3 :). I have a rip cut and have use…tag:kregjig.ning.com,2015-09-20:2900167:Comment:7635422015-09-20T00:13:06.287ZDennis Bakerhttps://kregjig.ning.com/profile/DennisBaker
<p>I have a rip cut and have used it many times without any issues at all. It has worked very well for me at all widths of rips up 2' wide, and a small as 2" wide. Sorry to hear you had trouble.</p>
<p>I have a rip cut and have used it many times without any issues at all. It has worked very well for me at all widths of rips up 2' wide, and a small as 2" wide. Sorry to hear you had trouble.</p> I recently used the RipCut fo…tag:kregjig.ning.com,2015-09-17:2900167:Comment:7626052015-09-17T00:53:01.404ZNeale Rowlandshttps://kregjig.ning.com/profile/NealeRowlands
<p>I recently used the RipCut for a number of cuts of various sizes. Whilst I agree that a better way to mount the saw should be found and aligning the gauge with the blade was fiddly, I found this device invaluable. </p>
<p>I recently used the RipCut for a number of cuts of various sizes. Whilst I agree that a better way to mount the saw should be found and aligning the gauge with the blade was fiddly, I found this device invaluable. </p> Duane, we are sorry to hear t…tag:kregjig.ning.com,2015-09-15:2900167:Comment:7619242015-09-15T14:31:31.890ZKregRephttps://kregjig.ning.com/profile/KregRep
<p>Duane, we are sorry to hear that you are experiencing issues and are not satisfied with your Rip-Cut<span>™</span> so far. If you could please get in touch with our Technical Support Team directly, they would be more than happy to help and offer their best advice. You may contact them by phone at 800-447-8638 or <a href="https://www.kregtool.com/customer-service/contact-us.aspx?source=1677" target="_blank">online</a>. Thank you for your interest in Kreg products. <br/>KregRep</p>
<p>Duane, we are sorry to hear that you are experiencing issues and are not satisfied with your Rip-Cut<span>™</span> so far. If you could please get in touch with our Technical Support Team directly, they would be more than happy to help and offer their best advice. You may contact them by phone at 800-447-8638 or <a href="https://www.kregtool.com/customer-service/contact-us.aspx?source=1677" target="_blank">online</a>. Thank you for your interest in Kreg products. <br/>KregRep</p>