Kreg Owners' Community

Kreg Members;

Recently I needed to make some long tapers for a friend who was installing his vanity and once level he needed 2 filler strips one against the wall and one along the floor. Well I pulled out my taper jig the metal one that pivots and has a little aluminum hook on the end it did the job but just barley and not really that safe so I put it away and remembered all the different tapering jigs I had used made or worked with over the years all of which did the job but could of been better.

In one of my flyers they had on sale the new Micro Jig model and it just happened I needed to make some table legs also I own 4 of the Gripper pushers and the Grippers work along with the Tapper Jig. So I went online and watched and looked at everything I could and was sold. Everyone knows by now I'm a big Kreg fan but after that I'm a Micro Jig fan.

 

For anyone who makes a lot of taper cuts on a table saw for what ever reason I highly recommend for the 140 dollars it is a great lifetime tool.

Best Taper Jig Yet watch it in use on the link below

https://www.youtube.com/watch?v=pJDetrSYZaY&list=PLuQf0KwE_Iq6i...

 

Jeff

Views: 380

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Jeff Metcalf on June 17, 2014 at 9:52am

Hello Gary;

Actually since it lays flat on the table saw or router table no problem with flexing, and yes it will do small pieces very safe as you can attach a Gripper in seconds and control the piece and the off cut as well. The only thing in the manufactures instructions is to tighten the knobs after adjusting the angle and do not cut with just using the detents to keep the angle set.

Comment by Gary roofner on June 17, 2014 at 4:59am

This looks like a good well though out jig.  Since its plastic is there much flexing? Does it work on small parts?

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_