Kreg Owners' Community

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled tenons etc., the time it takes me is ungodly.  Having made quite a few farmhouse tables and benches for clients, it only seemed like good business to offer chairs vs. buying unfinished chairs to finish to match, but in order to make money I need to be able to make them in a certain time frame, this tool was my answer for that and it has performed just as I was hoping.  I have also used it to make kitchen cabinet doors to inset glass (glass doors I always reinforced with a dowel in the corners or a spline) and has done a phenomenal job.  All my previous benches and tables used mortise and tenon joinery, this tool will definitely speed that process up by at least 3-4 hours on each project.  

     The Domino is much beefier than it looks on the internet and is of quality, it cuts dominoes with ease and many different sizes; speeds production for sure.  This tool operates just as advertised, the cut tolerances are perfect, for that, this tool is worth every bit of 5 stars.

      The price?  Insanity, as with all Festool products, they are not cheap by any stretch, but I think, just as with all of my tools, pick and choose the "needs" over the "wants", go from there.  At $1400 for the Domino and a Systainer with a collection of Dominoes, I have a lot of chairs to make before it pays for itself, but, the time it saves me, is a little extra time that I can spend with my family or doing other things.   

Views: 1006

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by justin waldron on February 9, 2019 at 4:19am

Thanks Mike De!

Comment by Mike De on February 7, 2019 at 2:37pm

check amazon.de next time you need accessories such as the domino filled sustainer.  It's about 100 cheaper after taxes and delivery.  Took about a week to arrive.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Drawer Slide Jig - How to fit bottom drawer?

Hi guys.I'm probably being really stupid here, but I cant see any way to use the drawer slide jig to fit the bottom drawer of a set?I actually have a couple of questions:Firstly, should the drawer slide fit flush with the bottom of the drawer?(That…Continue

Started by Craig in Beginners' Zone on Sunday.

Combination Pocket Hole and Tongue & Groove Joint

All material is 3/4"Tongue & groove is 1/4" tongue into a 1/4" grooveMy thinking is to set the jig and bit as though I was using 1" stock.  Use the screw called out for 3/4" material.  Is my thinking correct.ThanksGeorgeContinue

Started by George in Beginners' Zone Jun 13.

Product Reviews

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.



Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.



Then the real test, hook…

Continue

Posted by Grampy Meyer on February 23, 2020 at 11:36am

My K4 Master System

I picked up the K4MS from Home Depot about 3 months ago, I was looking for a small filing cabinet for under my desk and nothing I looked at would fit or they wanted big money for it, my wife said “why don’t you just build your own then you will…

Continue

Posted by Randy W. Lush on August 25, 2019 at 12:30pm

© 2020   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_