Kreg Owners' Community

I got my Kreg Jr for Christmas from my wife. There are some pieces of furniture that she is wanting me to build.

In the latest Family Handyman Magazine there is a closet storage solution that we really liked.

Our master closet has basic shelves and rods in it currently. We would like to make better use of the closet space.

The master closet is 10' by 11' .

here is my modified version of the closet storage system.
Photobucket
the wall this goes on is 6' 7" tall,

and here is a view of the other side. The tall wall is 11'
Photobucket

I was planning on building this all from 3/4 Plywood. If anyone has suggestions for type and grade that would be helpful. I am beginner at furniture construction and wood finishing.

Views: 1331

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Jenny on January 19, 2010 at 10:41am
Wow, that is going to make a big difference, good use of the space. Is the drawing done in SketchUp?
¾ birch ply would be pretty for this. And the birch is smooth enough not to snag sweaters on the shelves.
This would look nice out of 1-by also, to avoid snags from the edge grain of the ply.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_