The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…
ContinueAdded by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments
The Kreg K5 Jig is an excellent jig for pocket hole joinery. It's easy to use front loader makes clamping your pieces quick and simple. The attachment boxes on the…
ContinueAdded by Daris R. on November 20, 2017 at 5:39pm — No Comments
I am a long time kreg user and own many products, just purchased the kreg HD for use with some framing. I received it this weekend and was very disappointed once I opened the package to see the jig was only packaged in cardboard and no case to keep everything together. What do others use for a case for the HD? Also, was disappointed the area set for clamps was not the correct size to receive either side of the face clamps that I own. One side was too small (Jig would fall off) and the…
ContinueAdded by Mark McLean on May 31, 2015 at 4:00pm — No Comments
En español ver mas abajo
......................................................................................................................................................
After viewed a video of Ana White's Blog, I decided to buy a Right Angle Clamp and exceeds all my expectations.
Great quality, support, it let me one hand free, I can uses the same pressure for all the job (according with the thickness).
With this quality products (Kreg Jig Mini and Right…
ContinueAdded by José Ochoa on September 3, 2014 at 7:22pm — 4 Comments
Hi there.
I've bout the Kreg Right-Angle Clamp about two months ago and thought to give my two cents take of it for a change. I strongly suggest to make the pin side of the clamp a bit thinner. My problem is that with the standard drill bit that come with the Kreg 5 Jig it is a bit too think and Especially with soft wood (but not only) it tend to rip the hole, now I've just ordered the Mini jig attachment and absolutely sure it will basically be…
ContinueAdded by PJ on August 31, 2014 at 5:30pm — 7 Comments
English below
..........................................................................................................
Como principiante, uno trata de comprar herramienta y/o accesorios para tu taller o simplemente para reparar algún mueble en casa; estos días he comprado el Kreg Jig Mini.
Debo decir que pensaba que era muy dificil, en fin...un montón de pretextos pero, cuando lo usé por primer vez me quedé impresionado por la rápidez y eficiencia del…
Added by José Ochoa on August 17, 2014 at 2:30pm — No Comments
One of my favorite toys is my Kreg Drawer Slide Jig. There are actually two jigs that you'll want to use to help you install a drawer. These two jigs really compliment each other, and make completing drawer installs a snap. I picked up both jigs from Amazon for a really reasonable…
ContinueAdded by Daris R. on January 30, 2013 at 12:30am — 4 Comments
The Kreg Shelf Pin Jig is an excellent jig to add your woodworking collection. I've done the "make your own" pegboard type of jig. The problem is you cut it down to size and it seems like you never get it right the first time. When you do finally get it right it still feels a little off…
ContinueAdded by Daris R. on September 17, 2012 at 8:30am — 2 Comments
Yeah, I know what you're thinking and you're partly right. Why am I reviewing a glorified ruler? Well there is a little bit more to it than that. I have a couple of combo squares that I regularly use, and one of them broke a few weeks ago. Recently, I've turned into a…
ContinueAdded by Daris R. on July 11, 2012 at 3:00pm — 7 Comments
I don't believe in reviewing or giving opinions on woodworking books unless you can legitimately say you've built at least a couple of items from the book. I've completed the end tables in this book, and currently I'm working on the framed mirror project. Now that I have presented my…
ContinueAdded by Daris R. on May 29, 2012 at 3:30pm — 5 Comments
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service