Hi Tom,
I am sorry I haven't responded earlier but I am just moving into retirement and have been getting my affairs in order. To answer your questions on both my router table and planner stand I drew up plans on both on Turbo Cad before I built them. I find it easier to draw up my projects before I build. its easier to change a drawing if something doesn't work out than to throw a bunch of wood away and start over. As for changing out tools on the planner cart that would be an easy modification as the top drops into the frame and rests on the MDF sides. instead of attaching the top you could pin it down through the frame. then just unpin, change out the tool re-pin and you are ready to go. The height of the stand was just a common height that works for me. I have adjustable roller stands for in and out feed so height was not a concern. If I can be of any further help let me know. I will be able to respond a lot faster now.
Tom,
If you check on my page under chest plans there are dimensions on there, but what chest did you like so I can make sure you get the right ones.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service