After buying a flat panel 37" TV, our existing entertainment center had to go. Pricing new ones was discouraging. They cost almost as much as the TV! So I got the ok from my wife to build one. As I posted on the forum I ran into some trouble drilling the pocket screws into the oak faceframe. The screws caused bulges and a few poked through! Both pieces of wood were 3/4 inch and I followed the specs on my Kreg tools. I had no problems on my last project and I built to whole thing with a Kreg Jr.… Continue
Tim, great to see photos of your TV stand. the project is really coming together. I wanted to also pass along a tip to you. I think you can 'edit' your original blog post to add images to it instead of adding them individually as 'comments'. To do this, just look for the 'edit' button on your original post. Then, once you get all of the photos done, make sure to upload them to the 'photos' section and make an 'album'.
Awesome project! One I think a lot of people can relate to and look at yours to build their own.
Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom). Shelf holes in the walls are drilled 2" O.C. Like most store-bought…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…