"Hi, John. It's been nearly 2 months since you asked your question, so perhaps you've figured it out on your own. But here's my possible solution.
MDF is a wonderful product for many projects, but it isn't very strong…"
"Hi, George. It sounds like you are using a joinery method that I used a few years ago on a couple of projects. I'm going to try to attach some photos of the projects and samples of the joints I used.
If I recall, I used the…"
"Hi, Ed. The solution is to get larger struts, or at least struts that support more weight. With a 23" door, you'll need a pair of struts about 20" long, extended. One bracket would be installed on the window about…"
"Hi Peter. I haven’t seen any replies to your question, so maybe you’ve already finished the project. If not, here are my thoughts.
1-1/2 unsupported boards would concern me even though they are edge jointed and glued.…"
Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom). Shelf holes in the walls are drilled 2" O.C. Like most store-bought…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…