Here is a pdf of my design file for the vanity.It does not include the drawers as I waited until we had the top to do them. You will also need to figure out where you will be putting the pocket screws as I did not detail them in my drawings. If you have any questions do not hesitate to ask.
The Kreg Concealed Hinge Jig has a setting for the distance from edge of the door to the nearest edge of the 35 mm cup hole. This can be set as 3, 4, 5, or 6 mm.Later in the instruction there is a table that converts the distance from the edge of…Continue
I have an old Rip-Cut which I bought many years ago but did not set. I seem to have lost the instructions, if I ever had them.I cannot figure out which bolts are match with the nylon-lock screws.This unit is old enough that the current instructions…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…