Hi Larry Fantastic photos and some great pieces of workmanship, Six of those pub style chairs would look great on my patio, If you could send me some measurements for the chairs. I would be more than grateful, Cheers
I buy Kiln dried preasure treated then Kiln dried again Yellow Pine, which is the hardest of the soft woods. I buy 5/4 "decking and rip it just under 1 3/4'' to get three Slats . I use 2"X8"and cut the frame out of those. I run it thru my planer to prevent a lot of extra sanding. I predrill all the holes to prevent splitting. It does have some weight to it but not like the wet treated lumber. I haven't had any problem with weight myself.
I enjoyed seeing your work. I'm especially interested in building a porch swing to replace an old one. I like the ones shown in your pic numbers 100-1355 and 100-1294. The one I need will be 60" wide. Would you provide information on the type and dimension of wood you used? I'm concerned about weight for a seat of this size. Thanks
Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings? I scrolled through the pics in the community and all I saw were using a DIY base cabinet. I have an extra Kreg router…Continue
Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL. after years of waiting…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…