"There is a black "BB" in the clamp that provides the pressure for the clamp and fails by coming apart. Major flaw in my opinion. Probably some cheap synthetic out of China. I'm assuming that the petroleum based lubricant that I used…"
"Yes there is most definitely a trick to using these clamps. Undo the clamping pressure , in other words go into the negative.
They are so tight when they are made you have to "Break them In" adding lubricant will just make a mess. I used…"
I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue
I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…