Work Bench Drawers
-
Comment by duane ribron on August 12, 2010 at 2:24am
-
Nice.. I hope to play with the dovetail jig here and there in the hopes of learning it. But Kreg is easyer, and strong... so it will win more times than not ,,,
-
Comment by Joseph M. on August 12, 2010 at 12:51am
-
Yea I didn't have the time to learn it either. My workbench was actually finished over a year ago. Held off on the drawers because I didn't know a good way to join them. The Kreg jig opened the door to make a drawer.
-
-
I reciently inheareted a Porter Cable dovetail jig. Having a hell of a time figuring it out. It will be fine on one side, but ga[pped on the other. So I will most likley use my Kreg on the drawers that I will be building for a set of night tables. I would love to learn the dovetail jig, but just do not have the time to figure it out for this project. That and Kreg just plain rocks!
-
-
Yea the Kreg jig removed a slew of possible errors that I could have made.
Shelves are next.
-
Comment by Ryan Bruzan on August 5, 2010 at 11:06pm
-
I absolutely love build drawers with a Kreg jig.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
