Work Bench Drawers Completed
Thanks to my Kreg Jig I was able to build the drawers quickly. Time to move on to making shelves and tool holders on the sides and peg board. Using the Kreg Jig of course.
Views: 802
Projects: Work Bench Drawers
Favorite of 2 people
-
Comment by Joseph M. on October 31, 2010 at 11:15pm
-
Thanks guys, Scott, the plan for the workbench was from a PlansNow plan I bought. It may have been featured in Wood Magazine. I built the table about a year and a half ago. And yes I do use it as an outfeed table for my table saw! It works great!
-
Comment by Steve Meriweather on October 30, 2010 at 5:23pm
-
I like the drawers under your bench. Great idea.
-
Comment by Scott Garmon on October 30, 2010 at 4:44pm
-
Also looks like you sized the table height to use as an outfeed table for your tables saw. I did the same and it works great!
-
-
Great workbench. This looks very much like the one I built from the plans in Wood Magazine a few years ago. Did you use the same plans?
-
-
Thank you Ryan. I didn't think of it either until I read the plans for it. It really is heavy duty and gives a large workspace.
-
Comment by Ryan Bruzan on August 7, 2010 at 6:02am
-
I use the hollow cores and saw horses for my work site because they are light-weight. Silly me never thought to use a solid core for my shop table. Nice table.
-
-
That might be luan as a part of the assembly of the door. I finished it with 3 coats of polyurethane.
-
-
The top of the work bench is a solid core door - HD has tons of them.
-
-
Is that a luan door top?
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
