Kreg Owners' Community

  • Currently 0/5 stars.

Views: 1275

Projects: Multi-level deck and gazebo
Favorite of 1 person


You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Derek Gould on September 10, 2012 at 12:45pm

A floating foundation makes something like this easier, but again I'd caution against using this approach unless you're building something very low to the ground. The problem with a floating foundation is that you don't have the same kind of horizontal stability that you get from using footings; not an issue if you're 6 inches off the ground, but a potential problem if you're 6 feet off the ground!

Comment by Carlos on September 10, 2012 at 12:40pm
Floating foundation? Wow, i love it, I might just have to give it a try.
Comment by Derek Gould on September 10, 2012 at 5:22am

Carlos: not sure what your question is, but I did everything including the foundation and the decking. The foundation is a 'floating' foundation, using deck blocks; I based it on the sample plans available on In this case the deck is very close to the ground, in fact i dug holes for the blocks at the higher ends to make the deck as low as possible. For anything higher I would use buried posts set in concrete, but for a low deck this works. In my case the blocks were being set on very rocky and stable soil, but if you were building on softer soil I think you'd probably need to excavate and place gravel to ensure that the blocks were stable.

Comment by Carlos on September 10, 2012 at 2:42am
Does it include the decking? I figured you would have to know something about laying out a foundation.
Comment by Derek Gould on September 9, 2012 at 6:27pm

Carlos, I'm very much an amateur carpenter, so there's nothing here particularly complicated. I found there are lots of good resources online (including this one), so I researched each part before starting, and read as much as I could beforehand. There are a couple if minor things I would have changed if I were to start over, but nothing substantial, and this has been used every weekend since it was built.

Comment by Carlos on August 29, 2012 at 12:07pm

wow, this is way out of my leauge. I love it!!!

Comment by James Waller on August 26, 2012 at 6:59pm

I could enjoy this a lot, heck I will even be the boy statue.

Incredible job, this looks really great!

Comment by Mark J.Glinski on August 26, 2012 at 5:57pm

Wow.  Just wow.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone on Thursday.

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service