Display box - customer order

Comment

Comment by Laurie Hamiel on February 24, 2015 at 8:43pm

I bought a mylar stencil that would fit the size of my box side.  I took Titebond glue and mixed it with water in a throw away cup to the consistency it would drip if i took a shim and put some of the mix on it.  I then taped the stencil on the piece of wood with blue tape prior to assembling and put the glue on the stencil very lightly but covering the whole stencil.  It dried within and hour so I pulled off the stencil and sanded with a fine sanding block to get the high points of the glue off.  Once that was done I stained over the glue area and other pieces and assembled the box.  I am sure you can do the same with paint.  Thanks