Toy Box 1

Comment

Comment by Brian Smith on December 6, 2011 at 6:53pm

I sized everything to optimize with low waste from 4 x 8 sheet and used 1 x 3 trim

Comment by Darin Brown on December 5, 2011 at 4:17pm

just getting started with my Kreg and wanting to do something for my daugter's playroom and this would be great. any general idea on the dimensions of each box? I gathered from the comments, etc.. on the other photos that you just free-lanced without any real plans. got a general guess at a cut and supplies list to get a newbie down the right track? 4x8 plywood sheet for most of it and maybe some 1x2 or 1x3 for the trim on each side?

Mike- you can get some 4.5" wood letters from places like Hobby Lobby if you have one in your area for like $1.50/letter if you didn't want to mess with cutting them out yourself..

Comment by Brian Smith on December 5, 2011 at 2:22pm

I blew up the letters on an overhead projector and traced them onto plywood. Cut withjigsaw from there. The hinges were wood crafts stay open safety version.

Comment by Mike Erdmanczyk on December 1, 2011 at 11:23am

what kind of hindges were used?

Comment by Mike Erdmanczyk on December 1, 2011 at 11:22am

how were the letters made?