router table

Comment

Comment by steve kidd on March 8, 2011 at 9:40am

thanks for all the comments. joe i dont have any real plans. do have some more pics on my page. the cab is 38 in tall 48 wide and 22.5 deep the center opening is 28 in wide and 14 in tall. the triton is a great router, very strong, if you need any more info let me know. oak with cherry stain and wipe on poly.

Comment by Jay Boutwell on March 8, 2011 at 9:33am

Steve that is a very well configured router table. Nice and long for stock support before and after the router bit cut.  This would be great for cabinet door construction especially those long panel cuts.  I like the storage for the bits and router needs as well.  Equipted with that triton router, it is all a person should ever need.  Very nice job Steve,and sometimes I think building a project from your own thinking and ideas is the best as it is custom built for each individual.  Thanks for sharing this, you have given me a couple ideas.

Comment by Joe Luberto on March 8, 2011 at 9:01am

steve sweet table I would love to have the plans for this table if that is possible. How is the Triton router .

Comment by Matthew Brown on March 7, 2011 at 6:13pm

okay thanks steve!!!  i think thats all i need for now.

Comment by steve kidd on March 7, 2011 at 11:54am

hi matt just posted the pics, the size of the top is 22.5x 55, the cabinet is 38 in tall and 48 in wide. the center opening is 28 in wide and 14 in tall, the side drawers are 6 in wide the door openings below are 20 in tall and the cab is 20.5 in deep. hope this helps, let me know if you need more info

Comment by ron gagnon on March 6, 2011 at 9:43pm

nice steve router table hum i think

i saw under the router i need lmao

 

Comment by Matthew Brown on March 6, 2011 at 9:01pm

ohh thats sweet.  i never really woulda guessed that.

Comment by steve kidd on March 6, 2011 at 8:54pm

i will post some other pics also. the side doors are really drawers for bit storage

Comment by Matthew Brown on March 6, 2011 at 8:51pm

okayy thanks. and if you forget or whatever no big deal i think i have mine about figured out now

Comment by steve kidd on March 6, 2011 at 8:47pm

hi matt. no i made it from an idea in my head, i will get some measurements and  post them, thanks for the comments. the top is 22x55 i think. i will get the measurements on mon and post.

• ‹ Previous
• 1
• 2
• Next ›
• Page